Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

A guide to show how to replace Chumby One motherboard.

  1. Remove 4 self-adhesive plastic dots covering the screw holes.
    • Remove 4 self-adhesive plastic dots covering the screw holes.

  2. Remove the four 2mm screws with a Phillips screwdriver.
    • Remove the four 2mm screws with a Phillips screwdriver.

  3. Remove the back and bottom cover.
    • Remove the back and bottom cover.

  4. Disconnect the battery connector from the motherboard with a plastic opening tool.
    • Disconnect the battery connector from the motherboard with a plastic opening tool.

  5. Disconnect the microphone connector from the motherboard with a plastic opening tool.
    • Disconnect the microphone connector from the motherboard with a plastic opening tool.

  6. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  7. Remove the display ribbon cable from its socket with a plastic opening tool.
    • Remove the display ribbon cable from its socket with a plastic opening tool.

  8. Remove the volume knob from the side of the Chumby One with a plastic opening tool.
    • Remove the volume knob from the side of the Chumby One with a plastic opening tool.

  9. Remove the four 6mm screws using a PH000 bit on the inner chassis.
    • Remove the four 6mm screws using a PH000 bit on the inner chassis.

  10. Remove the inner components from the outer shell.
    • Remove the inner components from the outer shell.

  11. Remove the speaker connector using a plastic spudger.
    • Remove the speaker connector using a plastic spudger.

  12. Remove the Chumby button connector using a plastic spudger.
    • Remove the Chumby button connector using a plastic spudger.

  13. Remove three 6mm screws using a PH000 bit.
    • Remove three 6mm screws using a PH000 bit.

  14. Remove the motherboard by pulling straight away from the housing.
    • Remove the motherboard by pulling straight away from the housing.

    • Removing the motherboard there are 2 pins and socket connectors that may cause injury.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jordan Houchins

Membro da: 27/03/2017

401 Reputazione

4 Guide realizzate

Team

IUPUI, Team S3-G3, Baechle Spring 2017 Membro di IUPUI, Team S3-G3, Baechle Spring 2017

IUPUI-BAECHLE-S17S3G3

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 160