Salta al contenuto principale

Introduzione

Choosing the wrong screwdriver bit can sometimes mean the difference between repair success and repair distress. Follow the tips in this guide to correctly identify your screwdriver bits and prevent those woeful stripped screws.

If you're still running into trouble with your screws after reviewing the information here, check out this awesome guide for some screwdriver tips.

  1. The screw bits in our iFixit bit kits have engraved prefixes that indicate the head type. These prefixes are typically followed by a number that indicates bit size. For example: PH2 - (Phillips #2) A large Phillips bit.
    • The screw bits in our iFixit bit kits have engraved prefixes that indicate the head type. These prefixes are typically followed by a number that indicates bit size. For example:

    • PH2 - (Phillips #2) A large Phillips bit.

    • PH0 - (Phillips #0) A medium Phillips bit.

    • PH000 - (Phillips #000) A small Phillips bit.

    • Choose the bit size that fills the screw head entirely. A bit that is too big or too small will not seat properly, and you'll end up with a stripped screw.

  2. If you find yourself scratching your head over identifying the bits in your tool kit, feel free to use this reference list. Physical bit shape followed by proper name.
    • If you find yourself scratching your head over identifying the bits in your tool kit, feel free to use this reference list.

    • Physical bit shape followed by proper name.

    • Bit size.

    • If there is no prefix engraved in your bit, simply use the full proper name and size when using your bit in a guide. (For example: "Use a 1.5 mm Flathead bit to remove the two 5 mm case screws.")

  3. Bits with the prefix "J" and "PH" are often thought to be the same bit. Don't be fooled by their similar appearance—they are quite different. Phillips (PH) screws are designed to make a Phillips screwdriver cam out if too much torque is applied. This prevents damage to screws and screwdrivers or bits.
    • Bits with the prefix "J" and "PH" are often thought to be the same bit. Don't be fooled by their similar appearance—they are quite different.

    • Phillips (PH) screws are designed to make a Phillips screwdriver cam out if too much torque is applied. This prevents damage to screws and screwdrivers or bits.

    • Japanese Industrial Standard (J) screws do not provide a cam-out option, and have 90 degree corners.

    • J (JIS) and PH (Phillips) driver bits are not always interchangeable. As you can see, they do not share identical physical properties.

Linea Traguardo

Altre 48 persone hanno completato questa guida.

Richard Suovanen

Membro da: 07/02/2017

15.778 Reputazione

10 Guide realizzate

Excellent guide. could not figure out the difference by looking.

Lawrence Steinheuer-Turner - Replica

It would be clearer if the displayed drawing of each bit actually said J-bit or PH-bit, and because both have 90 degree corners, maybe change the J-bit description to “have 90 degree square inside corners“ and include in the PH description “have 90 degree rounded inside corners.

Otherwise, with interpretation, your article helped me.

Phil - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 31

Ultimi 7 Giorni: 254

Ultimi 30 Giorni: 1,183

Tutti i Tempi: 17,096