Salta al contenuto principale

Check for OBD2 codes, ABS, DTC without a scanner

Cosa ti serve

    • Turn ignition two clicks to the ON position

    • Insert a bent paperclip into the SCC connector. (See video for where the SCC connector is located)

    • Touch both of the exposed pins to short the connection. Continue to short the connection for more than 5 seconds.

    • Any codes will display on the Odometer/Trip display, or "NO" if there are no stored codes

    • Remove paperclip and wait 10 seconds

    • Turn ignition OFF and remove key

Linea Traguardo

ndsol

Membro da: 11/11/10

2.890 Reputazione

16 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 30

Ultimi 30 Giorni: 108

Tutti i Tempi: 2,929