Salta al contenuto principale

Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement

Cosa ti serve

  1. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement, Battery: passo 1, immagine 1 di 1
    • Slide the slider on the back of the phone to the free position.

  2. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: passo 2, immagine 1 di 1
    • Using a plastic opening tool, gently lift open the back panel from bottom of the panel.

  3. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: passo 3, immagine 1 di 2 Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: passo 3, immagine 2 di 2
    • Pull the white battery tab upwards and remove the battery.

  4. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement, Motherboard: passo 4, immagine 1 di 1
    • Remove the four 6mm Y0 screws from the corners of the device.

  5. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: passo 5, immagine 1 di 1
    • Remove the four 5mm Y0 screws from the back of the device.

  6. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: passo 6, immagine 1 di 1
    • Using a spudger, pry away the motherboard from its compartment, by inserting the spudger in the compartment and lifting upwards until fully out.

  7. Casio G'zOne Commando Verizon MIL-SPEC Motherboard Replacement: passo 7, immagine 1 di 1
    • Lastly, using your hands, separate the motherboard from its compartment.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Zack Almeida

Membro da: 10/24/18

392 Reputazione

4 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 176