Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Casio CTK-501 Battery Connection Replacement

Cosa ti serve

  1. Casio CTK-501 Battery Connection Replacement, Bottom Panel: passo 1, immagine 1 di 2 Casio CTK-501 Battery Connection Replacement, Bottom Panel: passo 1, immagine 2 di 2
    • Flip the keyboard over so that the bottom is facing up.

    • Remove the twenty-seven 12 mm screws from the dark-grey panel using a Phillips #2 screwdriver.

  2. Casio CTK-501 Battery Connection Replacement: passo 2, immagine 1 di 1
    • Remove the bottom panel by lifting and pulling it towards yourself.

  3. Casio CTK-501 Battery Connection Replacement: passo 3, immagine 1 di 2 Casio CTK-501 Battery Connection Replacement: passo 3, immagine 2 di 2
    • Flip open the top half of the keyboard.

    • Set the keyboard onto the bottom half with the internal parts facing up.

    • Be careful not to let the bottom drop.

  4. Casio CTK-501 Battery Connection Replacement, Battery Connection: passo 4, immagine 1 di 1
    • Plug in the soldering iron and set it somewhere safe where it can't catch anything on fire.

    • Unscrew the top green circuit board with black and red wires running into it.

  5. Casio CTK-501 Battery Connection Replacement: passo 5, immagine 1 di 1
    • Set the circuit board somewhere flat so it is safe to solder.

  6. Casio CTK-501 Battery Connection Replacement: passo 6, immagine 1 di 1
    • Heat up the solder covering the end of the wires connected to the circuit board. Once the solder melts, remove the wires from the circuit board.

  7. Casio CTK-501 Battery Connection Replacement: passo 7, immagine 1 di 1
    • Melt new solder with your soldering iron, then apply it over the tip of the wire touching the circuit board.

  8. Casio CTK-501 Battery Connection Replacement: passo 8, immagine 1 di 1
    • Once the wires are firmly attached screw the circuit board back onto the keyboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Jimmy Winne

Membro da: 10/04/12

578 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 9-16, Amido Fall 2012 Membro di Cal Poly, Team 9-16, Amido Fall 2012

CPSU-AMIDO-F12S9G16

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 24

Tutti i Tempi: 4,717