Salta al contenuto principale

Capresso Perfectea 260 Motherboard Replacement

Cosa ti serve

  1. Capresso Perfectea 260 Motherboard Replacement, Motherboard: passo 1, immagine 1 di 1
    • First, take the base of the device and flip it over.

  2. Capresso Perfectea 260 Motherboard Replacement: passo 2, immagine 1 di 2 Capresso Perfectea 260 Motherboard Replacement: passo 2, immagine 2 di 2
    • Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device.

  3. Capresso Perfectea 260 Motherboard Replacement: passo 3, immagine 1 di 1
    • Remove the two 7.5 mm Phillips #2 screws holding in the motherboard

  4. Capresso Perfectea 260 Motherboard Replacement: passo 4, immagine 1 di 1
    • Unplug the wire going into the side of the motherboard

  5. Capresso Perfectea 260 Motherboard Replacement: passo 5, immagine 1 di 2 Capresso Perfectea 260 Motherboard Replacement: passo 5, immagine 2 di 2
    • Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab.

    • Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out.

    • Be careful when unplugging the wire as if it is done too forcefully it can damage the connection and make it difficult to connect a new motherboard

  6. Capresso Perfectea 260 Motherboard Replacement: passo 6, immagine 1 di 1
    • Lift the motherboard out of the device

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 6-17, Maness Spring 2015 Membro di Cal Poly, Team 6-17, Maness Spring 2015

CPSU-MANESS-S15S6G17

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 231