Aggiusta la tua roba

Diritto alla Riparazione

Store

Canon ZR70MC LCD Component Replacement

Scritto Da: khalid clarke (e 3 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0

Difficoltà

Difficile

Passi

12

Tempo Necessario

20 - 25 minuti

Sezioni

2

Contrassegni

1

Missing Details

Dettagli Mancanti

Alcuni dettagli di questa guida sono mancanti. Aiuta gli utenti aggiungendo strumenti, livello di difficoltà o tempo di esecuzione.

Introduzione

Use this guide to replace the LCD screen on your device.

  1. Unscrew the 3.35mm screw. Unscrew the 3.35mm screw.

    • Unscrew the 3.35mm screw.

    Traduci

  2. Turn the ZR70MC so that you can see the bottom of the camcorder.

    • Turn the ZR70MC so that you can see the bottom of the camcorder.

    • Unscrew the 3.35 mm located in the top left portion of the camera.

    Traduci

  3. Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover. Remove the 2.65 mm screw. Remove the 2.65 mm screw.

    • Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover.

    • Remove the 2.65 mm screw.

    Traduci

  4. Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove. Locate and remove the two 3.35 mm screws. Locate and remove the two 3.35 mm screws.

    • Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove.

    • Locate and remove the two 3.35 mm screws.

    Traduci

  5. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

  6. Turn the camcorder so that the bottom is facing up and open the tape cassette compartment. There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.

    • Turn the camcorder so that the bottom is facing up and open the tape cassette compartment.

    • There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.

    Traduci

  7. Now that all of the screws are removed, remove the front panel by gently pulling on the front panel. The speaker will be connected to the main body by a wire. Be careful not to damage this wire. The speaker will be connected to the main body by a wire. Be careful not to damage this wire.

    • Now that all of the screws are removed, remove the front panel by gently pulling on the front panel.

    • The speaker will be connected to the main body by a wire. Be careful not to damage this wire.

    Traduci

  8. Use tweezers to gently pull the speaker wire from the main body of the camcorder. Pull the front panel completely away from the main body of the camcorder. Pull the front panel completely away from the main body of the camcorder.

    • Use tweezers to gently pull the speaker wire from the main body of the camcorder.

    • Pull the front panel completely away from the main body of the camcorder.

    Traduci

  9. Open the LCD screen. Locate and remove the 2.7 mm screw on the bottom of the LCD monitor. Locate and remove the 2.7 mm screw on the bottom of the LCD monitor.

    • Open the LCD screen.

    • Locate and remove the 2.7 mm screw on the bottom of the LCD monitor.

    Traduci

  10. Turn the LCD monitor so that the screen is facing down. There is a 2.7 mm screw on the LCD monitor where the monitor is connected to the main body of the camcorder. Remove the 2.7 mm screw. There is a 2.7 mm screw on the LCD monitor where the monitor is connected to the main body of the camcorder. Remove the 2.7 mm screw.

    • Turn the LCD monitor so that the screen is facing down.

    • There is a 2.7 mm screw on the LCD monitor where the monitor is connected to the main body of the camcorder. Remove the 2.7 mm screw.

    Traduci

  11. Turn the LCD monitor so that the screen is facing up. There is a 2.7 mm screw located where the LCD monitor is connected to the main body of the camcorder. Remove the 2.7 mm screw.

    • Turn the LCD monitor so that the screen is facing up.

    • There is a 2.7 mm screw located where the LCD monitor is connected to the main body of the camcorder. Remove the 2.7 mm screw.

    Traduci

  12. Now that all the screws are removed, use the plastic opening tool to gently pry the LCD monitor case open. Now that all the screws are removed, use the plastic opening tool to gently pry the LCD monitor case open. Now that all the screws are removed, use the plastic opening tool to gently pry the LCD monitor case open.

    • Now that all the screws are removed, use the plastic opening tool to gently pry the LCD monitor case open.

    Traduci

  13. Use tweezers to remove the wire connections that hold the LCD screen in place. Remove the entire LCD screen. Remove the entire LCD screen.

    • Use tweezers to remove the wire connections that hold the LCD screen in place.

    • Remove the entire LCD screen.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

khalid clarke

Membro da: 26/09/2017

728 Reputazione

7 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

USF Tampa, Team S13-G2, Boczar Fall 2017 Membro di USF Tampa, Team S13-G2, Boczar Fall 2017

USFT-BOCZAR-F17S13G2

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 67