Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the ZR70MC so that you can see the bottom of the camcorder.
-
Unscrew the 3.35 mm located in the top left portion of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover.
-
Remove the 2.65 mm screw.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove.
-
Locate and remove the two 3.35 mm screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the camcorder so that the bottom is facing up and open the tape cassette compartment.
-
There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Now that all of the screws are removed, remove the front panel by gently pulling on the front panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use tweezers to gently pull the speaker wire from the main body of the camcorder.
-
Pull the front panel completely away from the main body of the camcorder.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.