Aggiusta la tua roba Comunità Store

Canon Vixia HF R500 Battery Charger Replacement

Introduzione

The charging port of the Canon Vixia HF R500 is connected by a fragile ribbon cord. This cord can become damaged or disconnected preventing the battery from charging. This guide will show you how to check the connection.

Cosa ti serve

  1. Canon Vixia HF R500 Battery Charger Replacement, Grip Belt: passo 1, immagine 1 di 3 Canon Vixia HF R500 Battery Charger Replacement, Grip Belt: passo 1, immagine 2 di 3 Canon Vixia HF R500 Battery Charger Replacement, Grip Belt: passo 1, immagine 3 di 3

    • On the right side of the camcorder remove the grip belt.

    Modifica

  2. Canon Vixia HF R500 Battery Charger Replacement, Battery: passo 2, immagine 1 di 1

    • Hold on to the battery.

    Modifica

  3. Canon Vixia HF R500 Battery Charger Replacement: passo 3, immagine 1 di 1

    • On the bottom of the battery hold the battery release switch.

    Modifica

  4. Canon Vixia HF R500 Battery Charger Replacement: passo 4, immagine 1 di 1

    • Remove the battery slowly away from the camcorder.

    • Removing the battery quick or in a different angle may cause sparks and damage to device.

    Modifica

  5. Canon Vixia HF R500 Battery Charger Replacement, Canon Vixia HF R500 Disassembly: passo 5, immagine 1 di 2 Canon Vixia HF R500 Battery Charger Replacement, Canon Vixia HF R500 Disassembly: passo 5, immagine 2 di 2

    • Remove the two 8mm Philips #000 screws on the side where the grip belt was located on.

    Modifica

  7. Canon Vixia HF R500 Battery Charger Replacement: passo 6, immagine 1 di 1

    • Remove the two 4mm Philips #000 head screws from the bottom of the camcorder.

    • A hidden 4mm Philips #000 screw is shown under the black plug shown.

    Modifica

  8. Canon Vixia HF R500 Battery Charger Replacement: passo 7, immagine 1 di 1

    • Remove the side piece plate.

    Modifica

  9. Canon Vixia HF R500 Battery Charger Replacement: passo 8, immagine 1 di 1

    • Near the LCD screen, remove the three 7mm Philips #000 screws in the picture shown.

    Modifica

  10. Canon Vixia HF R500 Battery Charger Replacement: passo 9, immagine 1 di 1

    • Carefully place the camcorder where the inside of the device is facing upwards and remove the 3mm Philips #000 screw shown.

    • Do not use strong magnetic parts on the inside, as they may damage the device.

    Modifica

  11. Canon Vixia HF R500 Battery Charger Replacement: passo 10, immagine 1 di 1

    • Using the spudger, pull the tab shown to start removing the ribbon cable.

    Modifica

  12. Canon Vixia HF R500 Battery Charger Replacement: passo 11, immagine 1 di 3 Canon Vixia HF R500 Battery Charger Replacement: passo 11, immagine 2 di 3 Canon Vixia HF R500 Battery Charger Replacement: passo 11, immagine 3 di 3

    • Using the Spudger, carefully remove the two ribbon cables that are connected to the top of the device.

    Modifica

  13. Canon Vixia HF R500 Battery Charger Replacement: passo 12, immagine 1 di 1

    • Remove the top piece.

    Modifica

  14. Canon Vixia HF R500 Battery Charger Replacement, Battery Charger: passo 13, immagine 1 di 1

    • Ensure the ribbon cord is connected

    • Check the condition of the ribbon cord and replace damaged cord.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 9

Tutti i Tempi: 966