Aggiusta la tua roba Comunità Store

Canon Selphy CP720 Cooling Fan Replacement

Introduzione

This guide shows how to replace the cooling fan on the Selphy CP720. This is done to fix overheating problems caused by a faulty fan.

Cosa ti serve

  1. Canon Selphy CP720 Cooling Fan Replacement, Cooling Fan: passo 1, immagine 1 di 2 Canon Selphy CP720 Cooling Fan Replacement, Cooling Fan: passo 1, immagine 2 di 2

    • Remove the four 8mm Phillips #1 screws from the bottom of the printer.

    Traduci

  2. Canon Selphy CP720 Cooling Fan Replacement: passo 2, immagine 1 di 1

    • Gently lift the top half of the printer off its base

    • A data ribbon attaches the two halves, so don't pull hard and keep the two halves close together.

    Traduci

  4. Canon Selphy CP720 Cooling Fan Replacement: passo 3, immagine 1 di 3 Canon Selphy CP720 Cooling Fan Replacement: passo 3, immagine 2 di 3 Canon Selphy CP720 Cooling Fan Replacement: passo 3, immagine 3 di 3

    • Remove the side panel by lifting it out.

    Traduci

  5. Canon Selphy CP720 Cooling Fan Replacement: passo 4, immagine 1 di 2 Canon Selphy CP720 Cooling Fan Replacement: passo 4, immagine 2 di 2

    • Unplug the fan from the circuit board by gently pulling on the wire connector at the base of the port.

    • Do not tug on the wires. Slowly increasing force as you pull is the best way to detach the wires.

    Traduci

  6. Canon Selphy CP720 Cooling Fan Replacement: passo 5, immagine 1 di 1

    • Unscrew the two 8mm Phillips #1 screws from the fan.

    • Remove the fan from the panel.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 14

Tutti i Tempi: 310