Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Turn  the camera so the back of it is facing you.
    • Turn the camera so the back of it is facing you.

    • Pull the LCD screen towards you in order to open it,

  2. Unscrew the two 3 mm screws shown on the left side of the LCD screen panel  using a Phillips screwdriver. Unscrew the two 3 mm screws shown on the left side of the LCD screen panel  using a Phillips screwdriver.
    • Unscrew the two 3 mm screws shown on the left side of the LCD screen panel using a Phillips screwdriver.

  3. Unscrew the two 3 mm screws shown on the right side of the LCD screen panel. Unscrew the two 3 mm screws shown on the right side of the LCD screen panel. Unscrew the two 3 mm screws shown on the right side of the LCD screen panel.
    • Unscrew the two 3 mm screws shown on the right side of the LCD screen panel.

  4. Using the plastic opening tool, remove the rear case of the front LCD cover. Using the plastic opening tool, remove the rear case of the front LCD cover.
    • Using the plastic opening tool, remove the rear case of the front LCD cover.

  5. Pull off the back panel of the LCD screen and the plastic wire protector. Then replace the back panel.
    • Pull off the back panel of the LCD screen and the plastic wire protector. Then replace the back panel.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ellis DeVoe

Membro da: 14/04/2015

574 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 5-12, Maness Spring 2015 Membro di Cal Poly, Team 5-12, Maness Spring 2015

CPSU-MANESS-S15S5G12

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 195