Aggiusta la tua roba Comunità Store

Canon Powershot SX30 IS LCD Panel Front Cover Replacement

Cosa ti serve

  1. Canon Powershot SX30 IS LCD Panel Front Cover Replacement, LCD Panel Rear Cover: passo 1, immagine 1 di 1

    • Turn the camera so the back of it is facing you.

    • Pull the LCD screen towards you in order to open it,

    Modifica

  2. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 2, immagine 1 di 2 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 2, immagine 2 di 2

    • Unscrew the two 3 mm screws shown on the left side of the LCD screen panel using a Phillips screwdriver.

    Modifica

  3. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 3, immagine 1 di 3 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 3, immagine 2 di 3 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 3, immagine 3 di 3

    • Unscrew the two 3 mm screws shown on the right side of the LCD screen panel.

    Modifica

  5. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 4, immagine 1 di 2 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 4, immagine 2 di 2

    • Using the plastic opening tool, remove the rear case of the front LCD cover.

    Modifica

  6. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 5, immagine 1 di 1

    • Pull off the back panel of the LCD screen and the plastic wire protector. Then replace the back panel.

    Modifica

  7. Canon Powershot SX30 IS LCD Panel Front Cover Replacement, LCD Panel Front Cover: passo 6, immagine 1 di 1

    • Unscrew the 2mm screw on the outer edge of the panel

    Modifica

  8. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 7, immagine 1 di 2 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: passo 7, immagine 2 di 2

    • Unscrew the 3mm screw on the inner edge of the panel. This is easily done by rotating the screen to be perpendicular to the body of the camera, but be careful not to damage the wires or the circuit board.

    • The panel will fall right off

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Ellis DeVoe

Membro da: 04/14/15

580 Reputazione

5 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 5-12, Maness Spring 2015 Membro di Cal Poly, Team 5-12, Maness Spring 2015

CPSU-MANESS-S15S5G12

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 10

Tutti i Tempi: 563