Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Parti

Nessuna parte specificata.

  1. Open the protective door on the bottom of the camera, and remove the SD card and battery from the camera
    • Open the protective door on the bottom of the camera, and remove the SD card and battery from the camera

  2. Unscrew the two 2mm screws from the inside of the case Unscrew the two 2mm screws from the inside of the case
    • Unscrew the two 2mm screws from the inside of the case

  3. Remove the plastic backing and the metal front plate from the spring controlled hinge To replace, hold the plastic backing to the metal hinge and screw the plate onto the front of it
    • Remove the plastic backing and the metal front plate from the spring controlled hinge

    • To replace, hold the plastic backing to the metal hinge and screw the plate onto the front of it

Conclusione

That's It! Good Job!

Ellis DeVoe

Membro da: 14/04/2015

574 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 5-12, Maness Spring 2015 Membro di Cal Poly, Team 5-12, Maness Spring 2015

CPSU-MANESS-S15S5G12

4 Membri

5 Guide realizzate

What if the existing hinge is broken.....I need to replace the entire door and spring loaded hinge. Ya got instructions for that?

jusanotherhuman - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 444