Parti

Nessuna parte richiesta.

  1. Remove the 2 screws(2.41mm long) on the side of the camera next to the LCD screen.
    • Remove the 2 screws(2.41mm long) on the side of the camera next to the LCD screen.

    • Remove the 2 screws(4.08mm) on the other side. One is located under the rubber USB flap.

    • Remove the last screw(2.59mm) located on the bottom of the camera.

    • Slowly pull the back cover of the camera.

    Aggiungi Commento

  2. Remove the screw(2.59mm) from the bottom of the camera.
    • Remove the screw(2.59mm) from the bottom of the camera.

    • Remove the screw(4.08mm) from the menu button side of the camera.

    • The 2 screws on the other side of the camera were already removed when taking off the back cover.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Robert Manno

Membro da: 05/01/2011

432 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 13-3, Forte Winter 2011 Membro di Cal Poly, Team 13-3, Forte Winter 2011

CPSU-FORTE-W11S13G3

5 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,674