Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Canon Powershot A70 Rear Exterior Panel Replacement

Cosa ti serve

  1. Canon Powershot A70 Rear Exterior Panel Replacement, Rear Exterior Panel: passo 1, immagine 1 di 1
    • Unscrew the three small screws on the bottom of the camera with a Phillips #00 screwdriver.

    • Remove the wrist strap.

  2. Canon Powershot A70 Rear Exterior Panel Replacement: passo 2, immagine 1 di 1
    • Remove the screw in the CF compartment with a Phillips #00 screwdriver.

  3. Canon Powershot A70 Rear Exterior Panel Replacement: passo 3, immagine 1 di 3 Canon Powershot A70 Rear Exterior Panel Replacement: passo 3, immagine 2 di 3 Canon Powershot A70 Rear Exterior Panel Replacement: passo 3, immagine 3 di 3
    • Open the rubber Digital AV Out compartment flap.

    • Pry the battery with an opening tool.

    • Carefully pull out the battery with two fingers.

    • Remove the two screws that are now visible with a Phillips #00 screwdriver.

  4. Canon Powershot A70 Rear Exterior Panel Replacement: passo 4, immagine 1 di 2 Canon Powershot A70 Rear Exterior Panel Replacement: passo 4, immagine 2 di 2
    • Starting from the bottom, carefully pull the casing off.

    • The casing will now pivot at the top.

    • There are three catches that hold the back casing to the body.

    • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

  5. Canon Powershot A70 Rear Exterior Panel Replacement: passo 5, immagine 1 di 1
    • The interior of the camera should look like this.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 14-40, Regan Winter 2010 Membro di Cal Poly, Team 14-40, Regan Winter 2010

CPSU-REGAN-W10S14G40

5 Membri

15 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 3,240