Introduzione

In order to get to the internals of the Canon A610, we first have to remove the plastic casing around the camera.

Parti

Nessuna parte richiesta.

Unlock the battery cover, while swinging  the cover outward to open it.
  • Unlock the battery cover, while swinging the cover outward to open it.

Aggiungi Commento

Turn the camera over and allow the batteries to fall out.
  • Turn the camera over and allow the batteries to fall out.

  • Close the battery cover.

Aggiungi Commento

  • Remove the three 3 mm screws that attach the side panel to the body of the camera.

  • Using your fingernails, pull the side panel outward to remove it.

  • Remove the two remaining 2 mm screws that attach to the frame of the camera.

Aggiungi Commento

  • Remove the 3 mm screw that sits at the bottom of the camera, near the front side.

  • Remove the 4 mm screw that sits at the bottom of the camera, near the back side.

Aggiungi Commento

  • Open the battery cover.

  • Remove the 5 mm screw that sits on the top of the battery slot.

  • Remove the three 6 mm screws that sit at the bottom of the battery slot.

  • Close the battery cover.

Aggiungi Commento

  • Open the digital A/V DC terminal cover.

  • Remove the three 4 mm screws.

  • Detach the digital A/V DC terminal.

  • When you reassemble the camera, leave the topmost screw out until after you put the top casing back.

Aggiungi Commento

  • Grip the sides of the top cover and gently lift the cover until it detaches from the camera.

  • Do not completely remove the top cover; an orange ribbon cable still connects it to the camera.

Aggiungi Commento

  • Open the battery cover.

  • With the camera upside down, pull the front case's side that is closest to you, in an outward movement.

  • Apply some force, but pull it gently to prevent damage.

Aggiungi Commento

  • Open the memory card slot cover.

  • Remove the 3 mm screw that sits near the bottom of the case.

Aggiungi Commento

  • Flip the LCD screen all the way open.

  • Grip both sides of the back case's top and gently pull it, in an outward movement, until the case detaches.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Matthew Ramirez

Membro da: 20/01/2011

620 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 11-26, Maness Winter 2011 Membro di Cal Poly, Team 11-26, Maness Winter 2011

CPSU-MANESS-W11S11G26

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 8,074