Aggiusta la tua roba Comunità Store

Canon PowerShot SX160 IS Outer Case Replacement

Cosa ti serve

  1. Canon PowerShot SX160 IS Outer Case Replacement, Outer Case: passo 1, immagine 1 di 3 Canon PowerShot SX160 IS Outer Case Replacement, Outer Case: passo 1, immagine 2 di 3 Canon PowerShot SX160 IS Outer Case Replacement, Outer Case: passo 1, immagine 3 di 3

    • Unscrew 2-4.8mm black screws from the front of the camera using a #0 Phillips screwdriver.

    • Unscrew 2-4.8mm black screws from the side of the camera using a #0 Phillips screwdriver.

    • Unscrew 2-4.8mm black screws from the bottom of the camera using a #0 Phillips screwdriver.

    Modifica

  3. Canon PowerShot SX160 IS Outer Case Replacement: passo 2, immagine 1 di 2 Canon PowerShot SX160 IS Outer Case Replacement: passo 2, immagine 2 di 2

    • Using your hands, gently separate the back panel from the camera.

    • Continue to pull the back panel until it completely detaches from the camera.

    Modifica

  4. Canon PowerShot SX160 IS Outer Case Replacement: passo 3, immagine 1 di 2 Canon PowerShot SX160 IS Outer Case Replacement: passo 3, immagine 2 di 2

    • Use your hands to gently separate the front panel from the camera.

    • Continue to pull the front panel until it completely detaches from the camera.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Un commento

guide is missing removal of several screws. Four silver screws for front cover. I removed a total of 12 screws to remove covers. Guide only shows 6. Also requires disconnection of flex strip attached to front cover, from below wheel

Stewie Wewie - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 10

Tutti i Tempi: 1,799