Salta al contenuto principale

Canon PowerShot SX160 IS Function Wheel Replacement

Cosa ti serve

  1. Canon PowerShot SX160 IS Function Wheel Replacement, Function Wheel: passo 1, immagine 1 di 3 Canon PowerShot SX160 IS Function Wheel Replacement, Function Wheel: passo 1, immagine 2 di 3 Canon PowerShot SX160 IS Function Wheel Replacement, Function Wheel: passo 1, immagine 3 di 3
    • Unscrew the 2-4.8mm black Phillips head screws from the front of the camera using a #0 Phillips screwdriver.

    • Unscrew the 2-4.8mm black Phillips head screws from the side of the camera using a #0 Phillips screwdriver.

    • Unscrew the 3-4.8mm black Phillips head screws from the bottom of the camera using a #0 Phillips screwdriver.

  2. Canon PowerShot SX160 IS Function Wheel Replacement: passo 2, immagine 1 di 2 Canon PowerShot SX160 IS Function Wheel Replacement: passo 2, immagine 2 di 2
    • Using your hands, gently separate the back panel from the camera.

    • Continue to pull the back panel until it completely detaches from the camera.

  3. Canon PowerShot SX160 IS Function Wheel Replacement: passo 3, immagine 1 di 2 Canon PowerShot SX160 IS Function Wheel Replacement: passo 3, immagine 2 di 2
    • Use a #0 phillips screwdriver to unscrew the 3-3.75mm silver Phillips head screws from the function wheel panel of the camera.

  4. Canon PowerShot SX160 IS Function Wheel Replacement: passo 4, immagine 1 di 1
    • Remove and replace the function wheel.

Conclusione

Congratulations, you have successfully replaced your function wheel. To reassemble your device, follow these instructions in reverse order.

Un commento

Hi, I replaced the LCD screen but now my function wheel and panel don’t work. I think the ribbon got disconnected , but I can’t figure out where to attach it. Can you help?

Denise Domian - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 6

Tutti i Tempi: 568