Aggiusta la tua roba Comunità Store

Canon PowerShot SD850 IS LCD Screen Replacement

Guida Archiviata
Questa guida è mantenuta solo per scopi storici. Usa la versione aggiornata della guida per eseguire la riparazione.

Introduzione

Use this guide to access LCD screen and make repairs.

Cosa ti serve

  1. Canon PowerShot SD850 IS LCD Screen Replacement, Battery: passo 1, immagine 1 di 3 Canon PowerShot SD850 IS LCD Screen Replacement, Battery: passo 1, immagine 2 di 3 Canon PowerShot SD850 IS LCD Screen Replacement, Battery: passo 1, immagine 3 di 3

    • Slide the light grey tab toward the edge of the camera using your fingernail.

    • Pull the light grey tab up to open the door.

    • These photos do not show the camera’s memory card or battery, which should be visible inside.

    Modifica

  2. Canon PowerShot SD850 IS LCD Screen Replacement: passo 2, immagine 1 di 2 Canon PowerShot SD850 IS LCD Screen Replacement: passo 2, immagine 2 di 2

    • Slide the small brown tab toward the edge of the camera using your fingernail.

    • Let go of the brown tab when the battery pops up.

    • Grab battery and pull straight up to remove from holder.

    • When inserting the battery, orient it so that the terminals connect.

    Modifica

  3. Canon PowerShot SD850 IS LCD Screen Replacement, Case: passo 3, immagine 1 di 2 Canon PowerShot SD850 IS LCD Screen Replacement, Case: passo 3, immagine 2 di 2

    • Remove the following 4 screws:

    • Two 2.8 mm Phillips #00 at the bottom of the camera.

    • Two 2.75 mm Phillips #00 on the opposite side of the wrist strap.

    Modifica

  4. Canon PowerShot SD850 IS LCD Screen Replacement: passo 4, immagine 1 di 3 Canon PowerShot SD850 IS LCD Screen Replacement: passo 4, immagine 2 di 3 Canon PowerShot SD850 IS LCD Screen Replacement: passo 4, immagine 3 di 3

    • Open the A/V OUT DIGITAL flap on the side of the wrist strap.

    • Remove the 2.75 mm Phillips #00 under the A/V OUT DIGITAL flap on the side of the wrist strap.

    Modifica

  5. Canon PowerShot SD850 IS LCD Screen Replacement: passo 5, immagine 1 di 2 Canon PowerShot SD850 IS LCD Screen Replacement: passo 5, immagine 2 di 2

    • On the bottom of the camera, use your fingernail to slide the light gray tab towards the edge of the camera.

    • Slide light gray door and pull up to open the door.

    • Remove the 8.35 mm Phillips #00 next to the brown tab that holds the battery.

    Modifica

  7. Canon PowerShot SD850 IS LCD Screen Replacement: passo 6, immagine 1 di 2 Canon PowerShot SD850 IS LCD Screen Replacement: passo 6, immagine 2 di 2

    • Gently pull the front cover straight out from the camera. This will expose the wiring on the front of the camera.

    Modifica

  8. Canon PowerShot SD850 IS LCD Screen Replacement: passo 7, immagine 1 di 1

    • Remove the 2.75 mm Phillips #00 next to A/V OUT DIGITAL.

    Modifica

  9. Canon PowerShot SD850 IS LCD Screen Replacement: passo 8, immagine 1 di 1

    • Slide the back casing (with the screen protector) off to reveal the LCD and back wiring.

    Modifica

  10. Canon PowerShot SD850 IS LCD Screen Replacement, LCD Screen: passo 9, immagine 1 di 2 Canon PowerShot SD850 IS LCD Screen Replacement, LCD Screen: passo 9, immagine 2 di 2

    • Remove the three screws attached to the bottom of the LCD brackets

    Modifica

  11. Canon PowerShot SD850 IS LCD Screen Replacement: passo 10, immagine 1 di 2 Canon PowerShot SD850 IS LCD Screen Replacement: passo 10, immagine 2 di 2

    • Remove the one quarter bracket around the LCD screen

    • Remove the three quarter bracket around the LCD screen.

    Modifica

  12. Canon PowerShot SD850 IS LCD Screen Replacement: passo 11, immagine 1 di 3 Canon PowerShot SD850 IS LCD Screen Replacement: passo 11, immagine 2 di 3 Canon PowerShot SD850 IS LCD Screen Replacement: passo 11, immagine 3 di 3

    • Please Note: There are two areas of interest before removing the final bracket.

    • First, use a spudger to pry the the two tabs from the small guide pins.

    • Second, slide the bracket to the right as indicated in the second picture while lifting up. A small tab is holding the final bracket in place.

    • Remove the square metal bracket.

    Modifica

  13. Canon PowerShot SD850 IS LCD Screen Replacement: passo 12, immagine 1 di 1

    • At this point the screen should be easy to lift from the camera body.

    Modifica

  14. Canon PowerShot SD850 IS LCD Screen Replacement: passo 13, immagine 1 di 3 Canon PowerShot SD850 IS LCD Screen Replacement: passo 13, immagine 2 di 3 Canon PowerShot SD850 IS LCD Screen Replacement: passo 13, immagine 3 di 3

    • Lift the LCD screen and remove the two ribbon cables.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 8 altri collaboratori

iDeleted

Membro da: 07/07/10

2.101 Reputazione

39 Guide realizzate

Distintivi: 9

+6 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,529