Introduzione

Follow these steps to remove and install a new LCD screen.

Parti

Nessuna parte richiesta.

  1. Turn off camera by pressing power button above the LCD screen.
    • Turn off camera by pressing power button above the LCD screen.

    • Remove the battery and memory card.

  2. Remove the screws on the bottom of the camera using a 00 Philip's head screw driver
    • Remove the screws on the bottom of the camera using a 00 Philip's head screw driver

  3. Remove the screws on the right side of the camera.
    • Remove the screws on the right side of the camera.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Remove the screws on the left of the camera underneath the "A/V out Digital" cover flap.
    • Remove the screws on the left of the camera underneath the "A/V out Digital" cover flap.

  6. Remove the screws on the bottom of the camera near the battery and the memory card slots.
    • Remove the screws on the bottom of the camera near the battery and the memory card slots.

    • This screw is longer than the rest of the screws.

  7. Remove the front back and side casings from the camera.
    • Remove the front back and side casings from the camera.

  8. Remove the two screws that connect the LCD and backlight to the main body of the camera.
    • Remove the two screws that connect the LCD and backlight to the main body of the camera.

  9. Gently pry the LCD and the backlight from the main body of the camera. Gently pry the LCD from the backlight. The thin ribbon cable is for the backlight.
    • Gently pry the LCD and the backlight from the main body of the camera.

    • Gently pry the LCD from the backlight.

    • The thin ribbon cable is for the backlight.

    • The thick ribbon cable is for the LCD screen.

  10. Carefully lift the ZIF connector that covers the thick ribbon cable.
    • Carefully lift the ZIF connector that covers the thick ribbon cable.

    • This ZIF connector is fragile. Use caution when lifting it from its down position.

    • Insert the new LCD and reassemble the camera.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Emilio Rossi

Membro da: 07/04/2011

113 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 9-71, Walters Spring 2011 Membro di Cal Poly, Team 9-71, Walters Spring 2011

CPSU-WALTERS-S11S9G71

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 2,358