Introduzione

If you experience the E18 error, go to this site and try their solutions. http://www.e18error.com/repair.html

If you still experience the error, you can follow this guide to disassemble the camera and manually clean the inside of the camera and the lens.

Parti

Nessuna parte richiesta.

Turn off camera by pressing power button above the LCD screen.
  • Turn off camera by pressing power button above the LCD screen.

  • Remove the battery and memory card.

Aggiungi Commento

Remove the screws on the bottom of the camera using a 00 Philip's head screw driver
  • Remove the screws on the bottom of the camera using a 00 Philip's head screw driver

Aggiungi Commento

  • Remove the screws on the right side of the camera.

Aggiungi Commento

  • Remove the screws on the left of the camera underneath the "A/V out Digital" cover flap.

Aggiungi Commento

  • Remove the screws on the bottom of the camera near the battery and the memory card slots.

  • This screw is longer than the rest of the screws.

Aggiungi Commento

  • Remove the front back and side casings from the camera.

Aggiungi Commento

  • Once you have removed the front case, clean the lens and area surrounding the lens with a brush. Tweezers can be helpful when removing sand.

  • Once clean, reassemble the camera and if the E18 error persists, further disassembly of the camera may be required.

  • If you still experience E18 error, follow the lens dissasembly guide.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aaron Lee

Membro da: 07/04/2011

187 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 9-71, Walters Spring 2011 Membro di Cal Poly, Team 9-71, Walters Spring 2011

CPSU-WALTERS-S11S9G71

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 2,388