Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide open the battery cover.
-
Push the small orange tab to the side so the battery can be removed.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the battery out of the battery compartment.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Two Phillips screws need to be removed using a #00 Phillips screwdriver. The upper screw is under the USB port cover, which can simply be pulled away gently from the casing. the lower screw is visible on the panel.
-
The screws are different sizes. The .125 inch screw is located under the USB port cover. The 0.85 inch screw goes in the lower hole on the panel.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the right side cover from the camera casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove a .07 inch Phillips screw using a #00 Phillips screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove two .085 inch Phillips screws from the left side of the camera using a #00 Philips screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the left side cover from the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove three .15 inch Phillips screws from the bottom of the camera using a #00 Phillips screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once the casing is unscrewed, hold the camera with one side facing down, and lift the opposite face of the casing to open it.
-
Remove the internal camera components and layout out all pieces on a clean surface.
-