Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Canon PowerShot SD1400 IS Battery Replacement

Cosa ti serve

  1. Canon PowerShot SD1400 IS Battery Replacement, Battery: passo 1, immagine 1 di 1
    • The battery compartment is located on the bottom of the camera, below the user interface panel.

  2. Canon PowerShot SD1400 IS Battery Replacement: passo 2, immagine 1 di 1
    • The hatch covering the memory card will slide open towards the corner of the device.

  3. Canon PowerShot SD1400 IS Battery Replacement: passo 3, immagine 1 di 1
    • Once the hatch is slid so the end is overhanging the edge of the camera, you will be able to lift it open.

  4. Canon PowerShot SD1400 IS Battery Replacement: passo 4, immagine 1 di 1
    • Once open, you will see a small orange tab near the corner of the camera.

    • Push this tab towards the front face of the device, and the battery will freely fall out from the hatch.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Matt Holquist

Membro da: 02/01/18

136 Reputazione

1 Guida realizzata

Team

Baylor, Team S1-G3, Johnson Spring 2018 Membro di Baylor, Team S1-G3, Johnson Spring 2018

BU-JOHNSON-S18S1G3

3 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 36

Tutti i Tempi: 1,312