Salta al contenuto principale

Canon PowerShot SD1300 IS Shutter Button Replacement

Cosa ti serve

  1. Canon PowerShot SD1300 IS Shutter Button Replacement, Shutter Button: passo 1, immagine 1 di 3 Canon PowerShot SD1300 IS Shutter Button Replacement, Shutter Button: passo 1, immagine 2 di 3 Canon PowerShot SD1300 IS Shutter Button Replacement, Shutter Button: passo 1, immagine 3 di 3
    • Remove the two 2mm J00 screws on the right exterior.

    • Remove a single 4 mm J00 on the bottom exterior.

    • Remove a single 3mm J00 on the left exterior.

  2. Canon PowerShot SD1300 IS Shutter Button Replacement: passo 2, immagine 1 di 1
    • Once the front shell of the camera is removed the back shell should slide off just the same.

  3. Canon PowerShot SD1300 IS Shutter Button Replacement: passo 3, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Heavy-Duty Spudger
    $4.99
    Compra
  4. Canon PowerShot SD1300 IS Shutter Button Replacement: passo 4, immagine 1 di 1
    • Insert Heavy-Duty Spudger under shutter button to release shutter button.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Clayton

Membro da: 03/20/17

560 Reputazione

5 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 7

Tutti i Tempi: 236