Salta al contenuto principale

Canon PowerShot SD1300 IS Flash Assembly Replacement

Cosa ti serve

  1. Canon PowerShot SD1300 IS Flash Assembly Replacement, Flash Assembly: passo 1, immagine 1 di 3 Canon PowerShot SD1300 IS Flash Assembly Replacement, Flash Assembly: passo 1, immagine 2 di 3 Canon PowerShot SD1300 IS Flash Assembly Replacement, Flash Assembly: passo 1, immagine 3 di 3
    • Remove the two 2mm J00 screws on the right exterior.

    • Remove a single 4 mm J00 on the bottom exterior.

    • Remove a single 3mm J00 on the left exterior.

  2. Canon PowerShot SD1300 IS Flash Assembly Replacement: passo 2, immagine 1 di 1
    • Once the front shell of the camera is removed the back shell should slide off just the same.

  3. Canon PowerShot SD1300 IS Flash Assembly Replacement: passo 3, immagine 1 di 1
    • Remove a 3mm J00 screw from behind wires under the flash.

  4. Canon PowerShot SD1300 IS Flash Assembly Replacement: passo 4, immagine 1 di 1
    • Use plastic opening tool to remove the screen to gain access to the screws to remove the Flash Assembly.

  5. Canon PowerShot SD1300 IS Flash Assembly Replacement: passo 5, immagine 1 di 1
    • Remove the two 3mm J00 screws under the screen.

    • Remove the 4mm J00 screws under the screen.

    • The flash assembly is now released and should be able to be removed from the front side of the camera.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Clayton

Membro da: 03/20/17

560 Reputazione

5 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 12

Tutti i Tempi: 245