Salta al contenuto principale

Canon PowerShot SD1000 Shutter Button Replacement

Cosa ti serve

  1. Canon PowerShot SD1000 Shutter Button Replacement, Back Panel: passo 1, immagine 1 di 2 Canon PowerShot SD1000 Shutter Button Replacement, Back Panel: passo 1, immagine 2 di 2
    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

  2. Canon PowerShot SD1000 Shutter Button Replacement: passo 2, immagine 1 di 1
    • Remove the two 2.9 mm screws from the camera bottom panel.

  3. Canon PowerShot SD1000 Shutter Button Replacement: passo 3, immagine 1 di 1
    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

  4. Canon PowerShot SD1000 Shutter Button Replacement: passo 4, immagine 1 di 1
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. Canon PowerShot SD1000 Shutter Button Replacement: passo 5, immagine 1 di 1
    • Remove the small cover panel and the attached wrist strap mount.

  6. Canon PowerShot SD1000 Shutter Button Replacement, Front Case: passo 6, immagine 1 di 1
    • Remove the front cover by gently pulling it away from the camera body.

  7. Canon PowerShot SD1000 Shutter Button Replacement: passo 7, immagine 1 di 1
    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

  8. Canon PowerShot SD1000 Shutter Button Replacement, Shutter Button: passo 8, immagine 1 di 2 Canon PowerShot SD1000 Shutter Button Replacement, Shutter Button: passo 8, immagine 2 di 2
    • Using the spudger, take off the shutter button by prying the small tab on the front side of the camera.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 8-18, Maness Winter 2012 Membro di Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 1,131