Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Canon PowerShot S500 Front and Rear Casing Replacement

Cosa ti serve

  1. Canon PowerShot S500 Front and Rear Casing  Replacement, Front and Rear Casing : passo 1, immagine 1 di 2 Canon PowerShot S500 Front and Rear Casing  Replacement, Front and Rear Casing : passo 1, immagine 2 di 2
    • Unscrew five Phillips screws using a #0 Phillips screwdriver.

    • One screw is on upper right corner of the back panel.

    • The other four screws are on the bottom of the camera.

  2. Canon PowerShot S500 Front and Rear Casing  Replacement: passo 2, immagine 1 di 1
    • Open the memory card cover by moving the slide switch toward the top end of of the camera.

    • Remove the memory card from the slot.

  3. Canon PowerShot S500 Front and Rear Casing  Replacement: passo 3, immagine 1 di 1
    • Remove the rear cover from the rest of the camera.

    • This may require gentle rocking of the case to free it.

  4. Canon PowerShot S500 Front and Rear Casing  Replacement: passo 4, immagine 1 di 2 Canon PowerShot S500 Front and Rear Casing  Replacement: passo 4, immagine 2 di 2
    • Unscrew the four Phillips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver.

  5. Canon PowerShot S500 Front and Rear Casing  Replacement: passo 5, immagine 1 di 1
    • Free the front cover from the rest of the camera.

    • The cover may require gentle rocking to remove.

Linea Traguardo

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 16-28, Maness Winter 2010 Membro di Cal Poly, Team 16-28, Maness Winter 2010

CPSU-MANESS-W10S16G28

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,603