Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
First, we will locate the battery/memory card hatch. Second, we will change the main batteries and orient them properly. Third, we will change the clock battery.
Cosa ti serve
-
-
The battery hatch is on the bottom of the camera.
-
While the switch is pushed forward, pull the cover away from the camera.
-
-
-
-
This camera requires AA batteries. To remove batteries, simply allow them to fall out of the camera.
-
The clock battery cover is shown here in the purple circle. Use a fingernail to lift the battery out of the camera.
-
-
-
When replacing the AA batteries, verify they are oriented correctly by following the (+) and (-) signs on the camera.
-
To install new batteries and reassemble your device, follow these instructions in reverse order.
To install new batteries and reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.