Introduzione

First, we will locate the battery/memory card hatch. Second, we will change the main batteries and orient them properly. Third, we will change the clock battery.

  1. The battery hatch is on the bottom of the camera.
      • The battery hatch is on the bottom of the camera.

      • CAUTION: Locate the switch to open the hatch and push gently toward the front of the camera. Too much force can break the hatch.

      • While the switch is pushed forward, pull the cover away from the camera.

    Can the hatch be replaced. The piece that holds the hatch is broken.

    alisonbforman46 - Replica

  2. This camera requires AA batteries. To remove batteries, simply allow them to fall out of the camera.
      • This camera requires AA batteries. To remove batteries, simply allow them to fall out of the camera.

      • The clock battery cover is shown here in the purple circle. Use a fingernail to lift the battery out of the camera.

    Aggiungi Commento

    • When replacing the AA batteries, verify they are oriented correctly by following the (+) and (-) signs on the camera.

    Aggiungi Commento

Conclusione

To install new batteries and reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Zach

Membro da: 11/10/2010

230 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 9-19, Regan Fall 2010 Membro di Cal Poly, Team 9-19, Regan Fall 2010

CPSU-REGAN-F10S9G19

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 13

Tutti i Tempi: 6,135