Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While the switch is pushed forward, pull the cover away from the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
To remove batteries, simply allow them to fall out of the camera.
-
Use a fingernail to lift the clock battery out of the camera.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the screw located under the rubber flap on the left side of the camera using a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws located on the other side of the camera using a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three screws located at the bottom of the camera using a Phillips #00 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the battery cover.
-
Using the iFixit opening tool, push up gently around all edges of the camera.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.
Un commento
i just wanted to by flap to replace over batteries it slides on and off reedalice270@gm.com