Introduzione

If your printed documents or images are becoming distorted due to a dysfunctional printhead, use this guide to replace the printhead.

Strumenti

Nessun attrezzo richiesto.

Parti

Nessuna parte richiesta.

Press the power button to turn on the printer.
  • Press the power button to turn on the printer.

Aggiungi Commento

Pull down the front output tray cover.
  • Pull down the front output tray cover.

Aggiungi Commento

  • Lift the printer lid.

Aggiungi Commento

  • Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.

Aggiungi Commento

  • Push in the white clip to release the ink cartridge from the printhead.

  • Lift the ink cartridge from the printhead.

  • Repeat this process for the remaining ink cartridges.

  • You have successfully removed all ink cartridges.

Aggiungi Commento

  • After removing all ink cartridges, lift the printhead lock lever.

Aggiungi Commento

  • Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.

Aggiungi Commento

  • You have successfully removed your printhead.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Caitlyn

Membro da: 07/10/2014

596 Reputazione

4 Guide realizzate

Team

USF Tampa, Team 1-3, Leahy Fall 2014 Membro di USF Tampa, Team 1-3, Leahy Fall 2014

USFT-LEAHY-F14S1G3

3 Membri

4 Guide realizzate

fairly helpful, especially the photo's. but I need advice on how to clean the printhead before trying to replace it,

a1halber - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 86

Tutti i Tempi: 3,753