Salta al contenuto principale

Introduzione

This replacement guide shows how to remove the camera's LCD screen. The back panel must be removed before hand.

  1. Squeeze the eyepiece between your index finger and thumb and lift up and off
    • Squeeze the eyepiece between your index finger and thumb and lift up and off

  2. Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera
    • Using the PH000 screwdriver head, remove the four 4 mm screws on the bottom of the camera

  3. On the right side of the camera (from the LCD screen), use the PH000 screwdriver head to remove the two 3mm screws
    • On the right side of the camera (from the LCD screen), use the PH000 screwdriver head to remove the two 3mm screws

  4. Remove grip by slowly peeling off
    • Remove grip by slowly peeling off

  5. Using the PH000 screwdriver, remove the four 4mm screws behind the eyepiece
    • Using the PH000 screwdriver, remove the four 4mm screws behind the eyepiece

  6. On the left side of the camera (from the LCD screen), use the PH000 screwdriver head to remove one 4 mm screw
    • On the left side of the camera (from the LCD screen), use the PH000 screwdriver head to remove one 4 mm screw

  7. Remove side panel by lifting off with fingers
    • Remove side panel by lifting off with fingers

  8. Use hands to pry off the back panel
    • Use hands to pry off the back panel

  9. Using the PH00 screwdriver head, unscrew four 4 mm screws and one 2 mm screw
    • Using the PH00 screwdriver head, unscrew four 4 mm screws and one 2 mm screw

  10. Remove the metal plate covering inside of the LCD screen Remove the metal plate covering inside of the LCD screen
    • Remove the metal plate covering inside of the LCD screen

  11. Carefully disconnect the circuitry sheets from the white plastic bases
    • Carefully disconnect the circuitry sheets from the white plastic bases

  12. Using the plastic spudger, carefully pry out the LCD screen from the back panel Using the plastic spudger, carefully pry out the LCD screen from the back panel
    • Using the plastic spudger, carefully pry out the LCD screen from the back panel

Conclusione

To reassemble your device, follow these instructions in reverse order.

Erik Mork

Membro da: 27/01/2017

596 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 22-10, Maness Winter 2017 Membro di Cal Poly, Team 22-10, Maness Winter 2017

CPSU-MANESS-W17S22G10

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 22

Tutti i Tempi: 1,139