Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This is a necessary procedure for replacing the parts of the lens mount of the Canon EOS Rebel XS 35mm camera, which is located on the front of the camera. These parts include a flimsy, brass-colored layer and a silver layer. Both of these layers fit inside of the ring on the front of the camera in a specific way.
Cosa ti serve
-
-
Using a PH000 screwdriver bit, remove the 2 black screws circled in the picture, which are both 6 mm in length and 1.25 mm in diameter.
-
-
To reassemble your device, follow these instructions in reverse order.
Reassembly can be a lot harder than disassembly for this part of the camera, which accounts for the large range in estimated time.
To reassemble your device, follow these instructions in reverse order.
Reassembly can be a lot harder than disassembly for this part of the camera, which accounts for the large range in estimated time.
