Salta al contenuto principale

Introduzione

This is the procedure for replacing the film that is to be used by the camera. This is a necessary procedure because film is what allows pictures to be taken! And eventually, the film runs out. Assuming you have bought a new film canister with fresh film in it, this guide will show you the simple procedure of changing out the old film for the new film.

P.S. Make sure to properly dispose of the old film!

  1. Push up on the switch on the right side of the camera (if you’re facing the front of the camera) until you hear the clicking sound of the back latch opening. Push up on the switch on the right side of the camera (if you’re facing the front of the camera) until you hear the clicking sound of the back latch opening.
    • Push up on the switch on the right side of the camera (if you’re facing the front of the camera) until you hear the clicking sound of the back latch opening.

  2. Fully open the back latch.
    • Fully open the back latch.

  3. Locate the film on the left side of the camera (if you’re facing the back of the camera) and, like a battery, start pulling out the top portion of the film canister. Locate the film on the left side of the camera (if you’re facing the back of the camera) and, like a battery, start pulling out the top portion of the film canister.
    • Locate the film on the left side of the camera (if you’re facing the back of the camera) and, like a battery, start pulling out the top portion of the film canister.

  4. Completely pull out the old film (make sure to properly dispose of film!)
    • Completely pull out the old film (make sure to properly dispose of film!)

Conclusione

To reassemble your device, follow these instructions in reverse order.

christiansvezia

Membro da: 24/10/2018

1.096 Reputazione

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 98