Salta al contenuto principale

Canon EOS Rebel T1i Rubber Grip Replacement

Cosa ti serve

  1. Canon EOS Rebel T1i Rubber Grip Replacement, Rubber Grip: passo 1, immagine 1 di 3 Canon EOS Rebel T1i Rubber Grip Replacement, Rubber Grip: passo 1, immagine 2 di 3 Canon EOS Rebel T1i Rubber Grip Replacement, Rubber Grip: passo 1, immagine 3 di 3
    • Use a plastic prying tool to slowly pry the rubber grip from the top right corner, and slowly work the tool down the rubber grip.

    • Gently remove the rubber grip by pulling the adhesive side up and away from the camera.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jonathan Lin

Membro da: 04/14/14

548 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 3-41, Maness Spring 2014 Membro di Cal Poly, Team 3-41, Maness Spring 2014

CPSU-MANESS-S14S3G41

4 Membri

10 Guide realizzate

2 Commenti

день добрый. а как этот элемент крепиться, на клей?

yrgen - Replica

No, it is an adhesive film, looks like a paper, something like a double face scotch tape

Col -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 20

Tutti i Tempi: 2,540