Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

If the rubber grip on the camera is dirty or has fallen off, follow these instructions to remove the grip.

Strumenti

  1. Use a plastic prying tool to slowly pry the rubber grip from the top right corner, and slowly work the tool down the rubber grip. Gently remove the rubber grip by pulling the adhesive side up and away from the camera. Gently remove the rubber grip by pulling the adhesive side up and away from the camera.
    • Use a plastic prying tool to slowly pry the rubber grip from the top right corner, and slowly work the tool down the rubber grip.

    • Gently remove the rubber grip by pulling the adhesive side up and away from the camera.

  2. Kit cacciaviti Manta

    112 punte per ogni riparazione.

    Upgrade Your Toolbox

    Kit cacciaviti Manta

    Upgrade Your Toolbox
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jonathan Lin

Membro da: 14/04/2014

530 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 3-41, Maness Spring 2014 Membro di Cal Poly, Team 3-41, Maness Spring 2014

CPSU-MANESS-S14S3G41

4 Membri

10 Guide realizzate

день добрый. а как этот элемент крепиться, на клей?

yrgen - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 11

Tutti i Tempi: 1,682