Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • Clean the broken or cracked screen as best as possible.

    • Place the suction cup on the damaged screen.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 2 : passo 2, immagine 2 di 2
    • While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 3 : passo 3, immagine 2 di 3 : passo 3, immagine 3 di 3
    • Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture.

    • Remove the plastic screen from the camera.

    • Release the broken screen by pulling down the lever of the suction cup.

Linea Traguardo

Altre 5 persone hanno completato questa guida.

Michael Peck

Membro da: 04/14/14

167 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 3-41, Maness Spring 2014 Membro di Cal Poly, Team 3-41, Maness Spring 2014

CPSU-MANESS-S14S3G41

4 Membri

10 Guide realizzate

Un commento

Be sure to measure the size of your screen before buying the suction cups. I got the heavy-duty ones and then found that they were too big for my Rebel T1i screen.

cmorris - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 34

Tutti i Tempi: 5,414