Introduzione

This guide will take you through the steps required to change your screen and get a clear view of your picture.

  1. Clean the broken or cracked screen as best as possible.
    • Clean the broken or cracked screen as best as possible.

    • Place the suction cup on the damaged screen.

    Aggiungi Commento

  2. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
  3. While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.
    • While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.

    Aggiungi Commento

    • Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture.

    • Remove the plastic screen from the camera.

    • Release the broken screen by pulling down the lever of the suction cup.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Michael Peck

Membro da: 14/04/2014

134 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 3-41, Maness Spring 2014 Membro di Cal Poly, Team 3-41, Maness Spring 2014

CPSU-MANESS-S14S3G41

4 Membri

5 Guide realizzate

Be sure to measure the size of your screen before buying the suction cups. I got the heavy-duty ones and then found that they were too big for my Rebel T1i screen.

cmorris - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 34

Tutti i Tempi: 3,741