Introduzione
This guide shows you how to install a new lens connector.
Cosa ti serve
-
-
Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.
-
-
-
-
Using a Phillips #00 screwdriver, remove the 5 indicated screws
-
Five 6.2 mm Phillips screws
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.