Aggiusta la tua roba Comunità Store

Canon EOS 40D Shutter Assembly Replacement

Introduzione

An Error 99 is an non specific error which means that camera doesn't know or have a code for the problem. In my case the shutter assembly needed replacing. This was a fairly involved process for a beginner such as myself.

This is not a comprehensive guide but should be used in conjunction with the Canon Service Manual and youtube videos. I hope that some of the pictures I took along the way might help you identify or remember how each step works.

Cosa ti serve

  1. Canon EOS 40D Shutter Assembly Replacement, Shutter Assembly: passo 1, immagine 1 di 1

    • Get the Canon 40D Service Repair Manual

    • Have a clean and organized workspace. I labelled plastic trays by step number and put all items for each step in a separate tray.

    • Watch a couple Youtube videos on this process

    Traduci

  2. Canon EOS 40D Shutter Assembly Replacement: passo 2, immagine 1 di 2 Canon EOS 40D Shutter Assembly Replacement: passo 2, immagine 2 di 2

    • Peel off rubber grips

    Traduci

  3. Canon EOS 40D Shutter Assembly Replacement: passo 3, immagine 1 di 1

    • take off front piece

    Traduci

  5. Canon EOS 40D Shutter Assembly Replacement: passo 4, immagine 1 di 2 Canon EOS 40D Shutter Assembly Replacement: passo 4, immagine 2 di 2

    • take off rear

    • connectors disconnect by flipping black/brown tab up and sliding plastic tab out.

    Traduci

  6. Canon EOS 40D Shutter Assembly Replacement: passo 5, immagine 1 di 3 Canon EOS 40D Shutter Assembly Replacement: passo 5, immagine 2 di 3 Canon EOS 40D Shutter Assembly Replacement: passo 5, immagine 3 di 3

    • Take off top cover

    Traduci

  7. Canon EOS 40D Shutter Assembly Replacement: passo 6, immagine 1 di 3 Canon EOS 40D Shutter Assembly Replacement: passo 6, immagine 2 di 3 Canon EOS 40D Shutter Assembly Replacement: passo 6, immagine 3 di 3

    • take off bottom plate

    • disconnect and remove bottom board

    Traduci

  8. Canon EOS 40D Shutter Assembly Replacement: passo 7, immagine 1 di 1

    • remove CMOS assembly

    Traduci

  9. Canon EOS 40D Shutter Assembly Replacement: passo 8, immagine 1 di 1

    • remove metal back

    • remove and replace shutter assembly, transfering components that aren't on the new one

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

2 Commenti

how do you replace the bridge (male portion on camera) other than putting the card in a card reader

wareibevictoriap - Replica

how to replace the focus lock beeper

Dave Reitner - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 62

Tutti i Tempi: 7,173