Annulla

Canon EOS 300 Side Panel with Lever Replacement

Scritto Da: Jordan Tang (e 3 altri collaboratori)

Commenti: 0
Preferiti: 0

Canon EOS 300 Side Panel with Lever Replacement

Difficoltà

Moderato

Passi

5

Tempo Necessario

5 minuti

Introduzione

This guide removes the side panel of the camera, allowing for repairs on the side lever.

Strumenti

Acquista questi strumenti

Phillips #00 Screwdriver

6,99 US$

Compra

Parti

Nessuna parte specificata.

Passo 1 Batteries

Open up the battery door.

Open up the battery door.

Open up the battery door.

Open up the battery door.

Passo 2

Remove the batteries from the camera by sliding them out into your palm.

Remove the batteries from the camera by sliding them out into your palm.

Remove the batteries from the camera by sliding them out into your palm.

Passo 3 Side Panel with Lever

Release the side latch to open the back panel.

Release the side latch to open the back panel.

Release the side latch to open the back panel.

Passo 4

Remove the two black 4.5mm screws above and below the latch.

Remove the two black 4.5mm screws above and below the latch.

Remove the two black 4.5mm screws above and below the latch.

Passo 5

Using your finger, carefully pry open the side panel from the top of camera.

Pull panel downwards to remove.

Using your finger, carefully pry open the side panel from the top of camera.
Pull panel downwards to remove.
Make sure to keep track of the small black piece of rubber under the latch.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Jordan Tang

Membro da: 24/01/2014

531 Reputazione

5 Guide realizzate

+8 altri distintivi

Team

Cal Poly, Team 6-20, Maness Winter 2014 Membro di Cal Poly, Team 6-20, Maness Winter 2014

CPSU-MANESS-W14S6G20

4 Membri

11 Guide realizzate

0 Commenti

Aggiungi un commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 249