Salta al contenuto principale

Canon EOS 300 Side Panel with Grip Replacement

Cosa ti serve

  1. Canon EOS 300 Side Panel with Grip Replacement, Batteries: passo 1, immagine 1 di 3 Canon EOS 300 Side Panel with Grip Replacement, Batteries: passo 1, immagine 2 di 3 Canon EOS 300 Side Panel with Grip Replacement, Batteries: passo 1, immagine 3 di 3
    • Open up the battery door.

  2. Canon EOS 300 Side Panel with Grip Replacement: passo 2, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement: passo 2, immagine 2 di 2
    • Remove the batteries from the camera by sliding them out into your palm.

  3. Canon EOS 300 Side Panel with Grip Replacement, Side Panel with Lever: passo 3, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement, Side Panel with Lever: passo 3, immagine 2 di 2
    • Release the side latch to open the back panel.

  4. Canon EOS 300 Side Panel with Grip Replacement: passo 4, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement: passo 4, immagine 2 di 2
    • Remove the two black 4.5mm screws above and below the latch.

  5. Canon EOS 300 Side Panel with Grip Replacement: passo 5, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement: passo 5, immagine 2 di 2
    • Using your finger, carefully pry open the side panel from the top of camera.

    • Pull panel downwards to remove.

    • Make sure to keep track of the small black piece of rubber under the latch.

  6. Canon EOS 300 Side Panel with Grip Replacement, Front Panel: passo 6, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement, Front Panel: passo 6, immagine 2 di 2
    • Remove the two silver 6mm Phillips #1 screws.

  7. Canon EOS 300 Side Panel with Grip Replacement: passo 7, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement: passo 7, immagine 2 di 2
    • Flip camera over to the bottom.

    • Remove the one 5mm Phillips #1 silver screw.

  8. Canon EOS 300 Side Panel with Grip Replacement: passo 8, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement: passo 8, immagine 2 di 2
    • Remove the front panel by pulling away from the side with the lever.

  9. Canon EOS 300 Side Panel with Grip Replacement, Bottom Panel: passo 9, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement, Bottom Panel: passo 9, immagine 2 di 2
    • Remove three black 7.3mm Phillips #1 screws located on the corners of the camera.

    • Remove five black 4.8mm Phillips #1 screws.

  10. Canon EOS 300 Side Panel with Grip Replacement: passo 10, immagine 1 di 3 Canon EOS 300 Side Panel with Grip Replacement: passo 10, immagine 2 di 3 Canon EOS 300 Side Panel with Grip Replacement: passo 10, immagine 3 di 3
    • Simply remove the bottom panel by prying it off with your finger.

    • When removing the panel, be sure the bottom of the camera is facing upright. There are loose gears that may fall out.

    • Be wary of a loose piece of foam attached to the bottom panel.

  11. Canon EOS 300 Side Panel with Grip Replacement, Side Panel with Grip: passo 11, immagine 1 di 3 Canon EOS 300 Side Panel with Grip Replacement, Side Panel with Grip: passo 11, immagine 2 di 3 Canon EOS 300 Side Panel with Grip Replacement, Side Panel with Grip: passo 11, immagine 3 di 3
    • Remove the remote control socket cover.

  12. Canon EOS 300 Side Panel with Grip Replacement: passo 12, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement: passo 12, immagine 2 di 2
    • Remove two black 4.5mm Phillips #1 screws.

  13. Canon EOS 300 Side Panel with Grip Replacement: passo 13, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement: passo 13, immagine 2 di 2
    • Remove two black 4.8mm Phillips #1 screws on the front of the camera.

  14. Canon EOS 300 Side Panel with Grip Replacement: passo 14, immagine 1 di 2 Canon EOS 300 Side Panel with Grip Replacement: passo 14, immagine 2 di 2
    • Pry open the side grip using a spudger.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jordan Tang

Membro da: 01/24/14

590 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 6-20, Maness Winter 2014 Membro di Cal Poly, Team 6-20, Maness Winter 2014

CPSU-MANESS-W14S6G20

4 Membri

32 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 875