Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will teach a user how to replace a broken film rewind crank on the Canon AE-1 SLR. The film rewind crank allows the photographer to reel film back into its container once all exposures have been shot so that the film can be developed.

  1. Open the film compartment and place the screwdriver in the the slot to keep the shaft from moving.
    • Open the film compartment and place the screwdriver in the the slot to keep the shaft from moving.

  2. Remove the crank by rotating it counter-clockwise.
    • Remove the crank by rotating it counter-clockwise.

  3. Remove two phillips screws With the screws removed, the silver plate can now be removed as well.
    • Remove two phillips screws

    • With the screws removed, the silver plate can now be removed as well.

  4. Remove the film rewind crank.
    • Remove the film rewind crank.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Ben Barber

Membro da: 04/10/2011

408 Reputazione

2 Guide realizzate

Team

UW Stout, Team 5-1, Zhou Fall 2011 Membro di UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 14

Ultimi 7 Giorni: 40

Ultimi 30 Giorni: 162

Tutti i Tempi: 19,511