Aggiusta la tua roba Comunità Store

Campbell Hausfeld FP204800 Check Valve Replacement

Introduzione

The check valve replacement is straight forward. You will need to remove the shroud of the compressor. However, not much more disassembly is required for this replacement.

Cosa ti serve

  1. Campbell Hausfeld FP204800 Check Valve Replacement, Remove Shroud Screws: passo 1, immagine 1 di 3 Campbell Hausfeld FP204800 Check Valve Replacement, Remove Shroud Screws: passo 1, immagine 2 di 3 Campbell Hausfeld FP204800 Check Valve Replacement, Remove Shroud Screws: passo 1, immagine 3 di 3

    • Unscrew the four 1cm long shroud screws using a 6mm Allen Wrench.

    Modifica

  2. Campbell Hausfeld FP204800 Check Valve Replacement, Remove Shroud: passo 2, immagine 1 di 2 Campbell Hausfeld FP204800 Check Valve Replacement, Remove Shroud: passo 2, immagine 2 di 2

    • Remove the plastic shroud from the compressor.

    • Do not pull the shroud too far from the compressor. You could damage the on/off switch wiring.

    Modifica

  4. Campbell Hausfeld FP204800 Check Valve Replacement, Remove The Wiring From the Pressure Switch to the On/Off Switch: passo 3, immagine 1 di 1

    • Gently pull the wire attached from the pressure switch to the on/off switch.

    • It should come off the pressure switch with ease.

    • Make sure you are pulling the correct wire. The pressure switch could be in a different configuration on your compressor than in the picture.

    Modifica

  5. Campbell Hausfeld FP204800 Check Valve Replacement, Remove the On/Off Switch Wiring: passo 4, immagine 1 di 1

    • Gently pull the wire connected from the on/off switch to the motor of the compressor.

    • It should be the only wire keeping the shroud from being lifted from the compressor.

    Modifica

  6. Campbell Hausfeld FP204800 Check Valve Replacement, Unscrew Exhaust Tube: passo 5, immagine 1 di 1

    • Unscrew the exhaust tube from the check valve using a Smart Wrench.

    Modifica

  7. Campbell Hausfeld FP204800 Check Valve Replacement, Unscrew Check Valve: passo 6, immagine 1 di 1

    • Unscrew the check valve by twisting it counter-clockwise using a Smart Wrench.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 1 altro collaboratore

Caleb Davies

Membro da: 10/07/14

528 Reputazione

4 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

Cal Poly, Team 14-29, Maness Fall 2014 Membro di Cal Poly, Team 14-29, Maness Fall 2014

CPSU-MANESS-F14S14G29

4 Membri

7 Guide realizzate

2 Commenti

I never thought that it will be that much easy. I was looking for this kind of guide and thanks to ifixit and author of this guide I have successfully did the check valve replacement. Thanks for sharing this.

http://zahroofvalves.com

Rodney A. Olsen - Replica

1. How do you know if it’s the pressure switch that’s bad?

2. What do ya do when they say the parts are discontinued??

Jennifer Epps - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 14

Tutti i Tempi: 1,305