Salta al contenuto principale

CHI Spin N Curl Rotating Curler Power Cord Replacement

Cosa ti serve

  1. CHI Spin N Curl Rotating Curler Power Cord Replacement, Power Cord: passo 1, immagine 1 di 1
    • Use a metal spudger to pry off the silver, shiny trim.

  2. CHI Spin N Curl Rotating Curler Power Cord Replacement: passo 2, immagine 1 di 1
    • Remove inner black housing of the CHI Spin N Curl using the metal spudger to pop it out.

  3. CHI Spin N Curl Rotating Curler Power Cord Replacement: passo 3, immagine 1 di 2 CHI Spin N Curl Rotating Curler Power Cord Replacement: passo 3, immagine 2 di 2
    • Use a 2 mm flathead to remove the two screws.

  4. CHI Spin N Curl Rotating Curler Power Cord Replacement: passo 4, immagine 1 di 2 CHI Spin N Curl Rotating Curler Power Cord Replacement: passo 4, immagine 2 di 2
    • Use a metal spudger to pry open the seams of the device.

  5. CHI Spin N Curl Rotating Curler Power Cord Replacement: passo 5, immagine 1 di 3 CHI Spin N Curl Rotating Curler Power Cord Replacement: passo 5, immagine 2 di 3 CHI Spin N Curl Rotating Curler Power Cord Replacement: passo 5, immagine 3 di 3
    • Toward the bottom of the device, grab the swivel power cord.

    • Gently pull the power cord to detach it from the CHI Spin N Curl

    • Replace the faulty cord when the original cord has been removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

UMass Dartmouth, Team 2-7, Petersen Fall 2022 Membro di UMass Dartmouth, Team 2-7, Petersen Fall 2022

UMASSD-PETERSEN-F22S2G7

3 Membri

6 Guide realizzate

Un commento

but where to get new cable?

Kristián Feldsam - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 10

Tutti i Tempi: 312