Introduzione
This guide will show you the steps necessary to deconstruct and replace the circuit board for this part.
Cosa ti serve
-
-
Insert a nylon or metal spudger under the plastic CHI spring covers. Pry them up to pop them off. Do this for each side.
-
-
-
-
Remove the (2) .27" Phillips head screws on each half of the CHI Original.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.