Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Test pump performance by pumping 40 strokes.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two pins connecting the handle to the slider.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the two lever arms away from the slider.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the head and handle, and place them on a clean surface to prevent contamination.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Firmly lift the riser main slider with two hands.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a pipe wrench to fully loosen the above grade riser pipe.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the slider and riser main pipe.
-
Place a pump rod clamp around the rod, and tighten it securely against the pump rod.
-
Carefully lower the riser main and slider to allow it to rest on the rod clamp.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen and remove both the pump rod jam nut and pump rod nut on the top of the slider.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the riser main slider, and inspect it for wear and tear.
-
Set the slider in a sanitary place to prevent contamination.
-