Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide will show you how to remove the cylinder that encases the traveling valve and foot valve.
Cosa ti serve
-
-
Remove the above grade riser pipe.
-
Firmly screw a T-handle onto the pump rod.
-
-
-
Use a pipe wrench to loosen and remove the pump spout.
-
Place the spout on a clean surface to prevent any contamination.
-
-
-
-
Place one wrench on the top of one of the pump riser plate bolts.
-
Place another wrench around the bottom of the bolt.
-
Pull the wrenches apart to loosen the bolt.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.