Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
In this step we will be removing the rear casing from the sewing machine. This is necessary to access the inside components of the machine.
Cosa ti serve
-
-
Place the machine on a solid surface.
-
Remove the 14mm Phillips #2 screw holding on the face cover.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.