Aggiusta la tua roba Comunità Store

Broan-Nutone NU230BL Filter and Light Replacement

Introduzione

This simple guide demonstrates how to replace the filter and oven light in a Broan-Nutone NU230BL oven hood.

Long-term use of an oven hood can cause the quality of parts to deteriorate, in turn causing them not to work as effectively. This is very common and only requires you to replace a few of the worn-out parts, namely the oven hood light and filter.

Prior to starting the guide, make sure that the oven under the hood has been turned off for a significant time to ensure a minimal chance of injury. Never handle hot lightbulbs.

This guide requires little to no technical experience with kitchen appliances, and can all be done by hand.

Cosa ti serve

  1. Broan-Nutone NU230BL Filter and Light Replacement, Filter and Light: passo 1, immagine 1 di 1

    • Make sure the fan switch is centered, and the light switch is set to "off" to avoid any injuries.

    Modifica

  2. Broan-Nutone NU230BL Filter and Light Replacement: passo 2, immagine 1 di 1

    • Squeeze both ends of the bulb cover to pop it out of the slots.

    Modifica

  3. Broan-Nutone NU230BL Filter and Light Replacement: passo 3, immagine 1 di 2 Broan-Nutone NU230BL Filter and Light Replacement: passo 3, immagine 2 di 2

    • Make sure the lightbulb is cool before handling to avoid burns.

    • Unscrew and remove the lightbulb by turning it counterclockwise.

    Modifica

  5. Broan-Nutone NU230BL Filter and Light Replacement: passo 4, immagine 1 di 3 Broan-Nutone NU230BL Filter and Light Replacement: passo 4, immagine 2 di 3 Broan-Nutone NU230BL Filter and Light Replacement: passo 4, immagine 3 di 3

    • Twist the latch above the filter clockwise.

    • Slide the filter out by gently pulling it.

    Modifica

  6. Broan-Nutone NU230BL Filter and Light Replacement: passo 5, immagine 1 di 3 Broan-Nutone NU230BL Filter and Light Replacement: passo 5, immagine 2 di 3 Broan-Nutone NU230BL Filter and Light Replacement: passo 5, immagine 3 di 3

    • Insert the new filter.

    • Rotate the retaining latch counterclockwise to secure the filter.

    Modifica

  7. Broan-Nutone NU230BL Filter and Light Replacement: passo 6, immagine 1 di 2 Broan-Nutone NU230BL Filter and Light Replacement: passo 6, immagine 2 di 2

    • Install the new lightbulb and turn it clockwise.

    Modifica

  8. Broan-Nutone NU230BL Filter and Light Replacement: passo 7, immagine 1 di 2 Broan-Nutone NU230BL Filter and Light Replacement: passo 7, immagine 2 di 2

    • Reinsert the lightbulb cover by pressing both sides and fitting the cover's tabs into the slots.

    Modifica
Conclusione

Your range hood is good-to-go!

Un'altra persona ha completato questa guida.

Autore

con 1 altro collaboratore

Mahdi M

Membro da: 01/17/22

169 Reputazione

1 Guida realizzata

Distintivi: 5

+2 altri distintivi

Team

York University, Team P-21, O'Regan Winter 2022 Membro di York University, Team P-21, O'Regan Winter 2022

YORK-O'REGAN-W22SPG21

1 Membro

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 24

Tutti i Tempi: 710